Intricate floral lace cut from rose gold glitter cardstock layered over a cream wedding invitation, with a rolled rose gold glitter paper rose

How to Cut Glitter Cardstock With Cricut (Without Tearing It)

To cut glitter cardstock with Cricut, lay it glitter side up on a LightGrip mat, pick the Glitter Cardstock material in Design Space, and run a small test cut before the real one. Use a clean, sharp Fine-Point Blade. If the cut doesn't go all the way through, set pressure to More or run the cut a second time instead of pushing a dull blade harder.

Glitter cardstock has a reputation for being fussy, and honestly, some of it is. Cheap glitter sheds, tears at the corners, and clogs your blade. Mine is shed-free and sealed, so most of the battle is already won. The rest is settings and a few habits I'll walk you through below.

Shop Glitter Cardstock · Shop the Glitter Variety Pack · Shop the Glitter Swatch Book

Intricate floral lace cut from rose gold glitter cardstock layered over a cream wedding invitation, with a rolled rose gold glitter paper rose

What is the best way to cut glitter cardstock with a Cricut?

The best way is a test cut first, every time. Glitter cardstock is thicker than smooth cardstock, and every machine and blade is a little different. A small shape in the corner of the sheet tells you in seconds whether your setting cuts clean, and it costs you a scrap instead of a whole sheet.

My glitter cardstock is 250 gsm (about 92 lb), single-sided glitter on a white backing. The glitter is sealed into the sheet, not glued on the surface, so it cuts cleanly without flaking. That's the detailed floral cut in the photo at the top of this post: thin lines, tiny curves, and no torn glitter.

Cricut settings for glitter cardstock

  • Material: Glitter Cardstock in Design Space. If your cuts aren't clean, try the Heavy Cardstock setting instead.
  • Blade: the Fine-Point Blade that came with your machine. Make sure it's clean and sharp.
  • Mat: LightGrip, glitter side up.
  • Pressure: start at Default. Bump it to More only if the test cut doesn't go through.

Want settings for every weight and finish in one place? My Cricut settings reference covers smooth, glitter, and mirror cardstock.

How to cut glitter cardstock on a Cricut Explore Air 2

On the Explore Air 2, turn the dial on the machine to Custom. That tells Design Space to let you pick the material on screen. Then search for Glitter Cardstock in the material list, load your mat, and cut. If you leave the dial on the Cardstock setting, the machine uses that setting no matter what you pick on screen.

On a Cricut Maker or Cricut Joy there's no dial. You choose Glitter Cardstock right in Design Space after you click Make It.

How to cut thick glitter cardstock with a Cricut

Thick glitter cardstock needs more patience, not more force. Here's what I try, in order:

  1. Change to a fresh blade. A dull blade drags and tears glitter.
  2. Set pressure to More on the Glitter Cardstock setting.
  3. If it still won't cut through, leave the mat loaded and run the cut a second time. A second pass is cleaner than one heavy pass.

Don't unload the mat to check. Once it's out, getting the sheet back in the exact same spot is nearly impossible. Lift one corner of a cut piece with your fingernail while the mat is still in the machine.

What you'll need

How to cut glitter cardstock with Cricut: step by step

Step 1: Put the glitter side up

The blade cuts from the top, so the glitter side faces up. Press the sheet down with your hand or a brayer so it sits flat on the mat.

Step 2: Pick your material

Click Make It, then choose Glitter Cardstock. On an Explore, set the dial to Custom first.

Step 3: Test cut

Cut one small shape, like a circle, in a corner. Check that it pops out clean with no glitter lifting at the edges.

Step 4: Cut your design

Run the full design. If you see any spot that didn't cut through, run it again before you unload.

Step 5: Peel the mat, not the paper

Flip the mat over and bend the mat away from the cardstock. Pulling the cardstock up off the mat is how you curl and crease thin pieces.

Tips for clean glitter cuts

  • Keep a blade just for glitter: glitter wears a blade faster, so your smooth cardstock blade stays sharp longer.
  • Clean the blade: if cuts get rough, pop the blade out and check for paper fibers stuck to it.
  • Size details up a little: very tiny pieces are harder in thicker material. If a letter keeps tearing, make the design a bit bigger.
  • Plan your colors first: the glitter swatch book shows every color before you buy full sheets.
  • Layer it on smooth: glitter looks best as the top layer on a smooth cardstock base, like a glitter name on a card or a cake topper.

Frequently asked questions

What setting do I use to cut glitter cardstock on a Cricut?

Choose Glitter Cardstock in Design Space with the Fine-Point Blade and a LightGrip mat. If the cut isn't clean, try Heavy Cardstock or set pressure to More, and always run a test cut first.

Does glitter cardstock go glitter side up or down on the mat?

Glitter side up. The blade cuts from the top, so the side you want to look perfect faces up.

Why is my Cricut tearing my glitter cardstock?

The most common cause is a dull or dirty blade. Swap in a fresh blade, run a test cut, and run a second pass instead of raising pressure too high.

How do I cut glitter cardstock on a Cricut Explore Air 2?

Turn the dial to Custom, then choose Glitter Cardstock in Design Space. If the dial is on Cardstock, the machine ignores the material you pick on screen.

Does your glitter cardstock shed when you cut it?

No. The glitter is sealed into the sheet, not glued on the surface, so it cuts cleanly without flaking.

Go cut something sparkly

Shop Glitter Cardstock · Shop the Glitter Variety Pack · Shop the Glitter Swatch Book

If you make one, tag me at @ashleeyfalco. I want to see it.

xo, Ashlee

Regresar al blog